Orbit-attitude-vibration coupled dynamics of tethered solar power satellite

A new orbit-attitude-vibration coupled dynamic model of the tethered solar power satellite (Tethered SPS) is established based on absolute nodal coordinate formulation. The Hamilton’s equation of the system is derived by introducing generalized momentum through Legendre transformation. The correctness of the proposed model is verified by an example. The dynamic characteristics of the Tethered SPS are studied using the symplectic Runge-Kutta method. Simulation results show that the orbital radius and the total energy of the system are well preserved. The attitude of the system is unstable when the mass of the bus system is small. However, the attitude stability is dependent on some other parameters of the system, which requires further studies. It is also found that the average tether force/deformation can be roughly estimated by simplifying the solar panel as a particle. The proposed model can be used to study the orbit-attitude-vibration coupled dynamics and control problems.     

从美军"PTN"项目看前沿技术在飞行员训练体系中的应用前景

美国空军教育和训练司令部"PTN"项目即"未来飞行员训练计划"已经完成两期验证,项目重点集成了虚拟现实、增强现实、先进生理传感器、人工智能和大数据分析技术,研究了新技术对飞行员训练的适用性.项目取得了良好的效果,美军计划将该项目作为未来飞行员训练体系的重要组成部分.本文分析了"PTN"项目的 组织实施过程和实施效果,阐述了人工智能、虚拟现实、大数据等前沿技术在飞行员培训体系中的应用前景.     

Study of ionospheric D region changes during solar flares using MF radar measurements

During solar flares, the X-ray radiation suddenly increases, resulting in an increase in the electron density of the atmospheric D region and a strong absorption of short-wave radio waves. Based on Langfang medium frequency (MF) radar, this paper analyzed the variation characteristics of D region in the lower ionosphere from 62 km to 82 km. The analysis focused on multiple C-level and M-level solar flare events before and after the large-scale flare event at 11:53 (UT) on September 6, 2017. The results show that it is difficult to detect the electron density over 70 km in Langfang during solar flares, but the electron density value can be obtained as low as 62 km, and the stronger the flare intensity, the lower the detectable electron density height. Besides, the equal electron density height, the received power of X and O waves will also be significantly reduced during the flares, and the reduction of equal electron density height has a weak linear relationship with flare intensity.     

Scientific objectives and payloads of Tianwen-1, China’s first Mars exploration mission

This paper describes the scientific objectives and payloads of Tianwen-1, China’s first exploration mission to Mars. An orbiter, carrying a lander and a rover, lifted-off in July 2020 for a journey to Mars where it should arrive in February 2021. A suite of 13 scientific payloads, for in-situ and remote sensing, autonomously commanded by integrated payload controllers and mounted on the orbiter and the rover will study the magnetosphere and ionosphere of Mars and the relation with the solar wind, the atmosphere, surface and subsurface of the planet, looking at the topography, composition and structure and in particular for subsurface ice. The mission will also investigate Mars climate history. It is expected that Tianwen-1 will contribute significantly to advance our scientific knowledge of Mars.     

宽带高集成多级射频互连技术

针对微波电路三维集成结构的迫切需求,开展宽带高集成多级射频互连技术研究。主要设计了两种电路结构,多级水平互连电路与多级垂直互连电路。多级水平互连电路中,通过优化同轴-微带线的水平过渡以及倒角过渡方式,得到在DC～30GHz内的仿真结果,回波损耗优于21dB,插入损耗优于0.16dB;多级垂直互连电路中,通过优化BGA板间互连结构,得到在DC～30GHz内的仿真结果,信号的回波损耗优于13dB,插入损耗优于0.57dB。在小型化、高集成的需求下,宽带高集成多级射频互连技术是解决宽带射频信号传输问题的关键技术路径,可以广泛应用在微波电路三维集成结构中,具有重大的应用前景。     

基于双环滑模控制的直/气复合控制系统设计

直/气复合控制导弹具有强干扰、强非线性以及强耦合等特点，传统的姿态控制器难以适用于该种复杂干扰并存的情况，文章提出了基于双环滑模控制的直/气复合控制器。首先采用有限时间收敛趋近律分别构造内外环滑模控制器，并将角速度回路的滑模变量量化为直接力指令，以解决空气舵与姿控发动机之间的耦合问题。接着使用非线性扩张状态观测器估计综合干扰，从而设计控制器补偿侧向喷流干扰及模型不确定性等综合干扰的影响。然后基于李雅普诺夫方法证明了控制系统闭环稳定，分析了干扰补偿对控制器收敛域的影响。最后仿真结果表明，该方法跟踪速度快，动态过程平稳，具有较强的干扰抑制能力，具有很强的鲁棒性。     

150 N气氧/煤油发动机涡流冷却技术试验

为探索百牛量级姿控发动机采用气氧/煤油涡流冷却推力室的可行性,开展了涡流冷却技术的试验验证工作。在理论分析和数值仿真的基础上,完成了150 N气氧/煤油涡流冷却推力室设计。数值仿真结果表明:内旋流区域占燃烧室直径D_c的87.8%,燃烧化学反应发生在39%～81%R_c的环形区域。经热试考核,燃烧室点火可靠,工作稳定,燃烧效率达0.91;形成了有效的气膜冷却,壁面和头部热防护可靠,充分验证了内外双漩涡结构的存在。     

Backstepping sliding-mode control of stratospheric airships using disturbance-observer

In the presence of unknown disturbances and model parameter uncertainties, this paper develop a nonlinear backstepping sliding-mode controller (BSMC) for trajectory tracking control of a stratospheric airship using a disturbance-observer (DO). Compared with the conventional sliding mode surface (SMS) constructed by a linear combination of the errors, the new SMS manifold is selected as the last back-step error to improve independence of the adjustment of the controller gains. Furthermore, a nonlinear disturbance-observer is designed to process unknown disturbance inputs and improve the BSMC performances. The closed-loop system of trajectory tracking control plant is proved to be globally asymptotically stable by using Lyapunov theory. By comparing with traditional backstepping control and SMC design, the results obtained demonstrate the capacity of the airship to execute a realistic trajectory tracking mission, even in the presence of unknown disturbances, and aerodynamic coefficient uncertainties.     

Simulation and analysis of chemical release in the ionosphere

Ionospheric inhomogeneous plasma produced by single point chemical release has simple space-time structure, and cannot impact radio wave frequencies higher than Very High Frequency (VHF) band. In order to produce more complicated ionospheric plasma perturbation structure and trigger instabilities phenomena, multiple-point chemical release scheme is presented in this paper. The effects of chemical release on low latitude ionospheric plasma are estimated by linear instability growth rate theory that high growth rate represents high irregularities, ionospheric scintillation occurrence probability and high scintillation intension in scintillation duration. The amplitude scintillations and the phase scintillations of 150?MHz, 400?MHz, and 1000?MHz are calculated based on the theory of multiple phase screen (MPS), when they propagate through the disturbed area.     

Quantitative Rectangular Notch Detection of Laser-induced Lamb Waves in Aluminium Plates with Wavenumber Analysis

It is difficult to quantitatively detect defects by using the time domain or frequency domain features of Lamb wave signals due to their dispersion and multimodal characteristics.Therefore,it is important to discover an intrinsical parameter of Lamb waves that could be used as a damage sensitive feature.In this paper,quantitative defect detection in aluminium plates is carried out by means of wavenumber analysis approach.The wavenumber of excited Lamb wave mode is a fixed value,given a frequency,a thickness and material properties of the target plate.When Lamb waves propagate to the structural discontinuity,new wavenumber components are created by abrupt wavefield change.The new wavenumber components can be identified in the frequency-wavenumber domain.To estimate spatially dependent wavenumber values,a short-space two-dimensional Fourier transform(FT)method is presented for processing wavefield data of Lamb waves.The results can be used to determine the location,size and depth of rectangular notch.The analysis techniques are demonstrated using simulation examples of an aluminium plate with a rectangular notch.Then,the wavenumber analysis method is applied to simulation data that are obtained through a range of notch depths and widths.The results are analyzed and rules of the technique with regards to estimating notch depth are determined.Based on simulation results,guidelines for using the technique are developed.Finally,experimental wavefield data are obtained in aluminium plates with rectangular notches by a full noncontact transceiving method,i.e.,laser-laser method.Band-pass filtering combined with continuous wavelet transform is used to extract a certain frequency component from the full laser-induced wavefield with wide band.Shortspace two-dimensional FT method is used for further processing full wavefield data at a certain frequency to estimate spatially dependent wavenumber values.The consistency of simulation and experimental results shows the effectiveness of proposed wavenumber method for quantitative rectangular notch detection.